The quality requirements of fine grade galvanized sheet include several aspects such as size, surface, galvanizing amount, chemical composition, plate shape, machine function and packaging.
1. Package
It is divided into galvanized sheet cut to a fixed length and galvanized sheet packaging with coil. General iron packaging, lined with moisture-proof paper, with iron waist tie, tie firmly, to prevent the internal galvanized sheet friction with each other.
2. Specification and size
The relevant product scales (such as and below) specify the scale thickness, length and width of the galvanized sheet guarantee and their allowable faults. In addition, the width and length of the board and the width of the volume can also be determined according to the user's request.
3. Surface
General situation: Because of the differences in the treatment methods in the plating process, the general situation of the galvanized plate is also different, such as ordinary zinc flowers, fine zinc flowers, flat zinc flowers, zinc-free flowers and phosphating disposal profiles. Galvanized sheet and galvanized coil cut to a fixed length shall not have defects that affect the use of the coil, but the coil is allowed to have less deformed parts such as welding parts.
4. Galvanized amount
Galvanizing measure value: Measuring galvanizing measure is a widely adopted method to determine the thickness of zinc layer of galvanized sheet. There are two kinds of zinc plating with the same amount on both sides (that is, equal thickness zinc plating) and two kinds of zinc plating with different amount on both sides (that is, difference thickness galvanized). The unit of galvanizing quantity is g/m2.
Electrical Galvanized Steel Quality Inspection Standard
Dec 21, 2023
Leave a message

