NEWS
The performance of Galvanized Steel Sheet does not depend solely on production quality. Proper packaging and loading play a vital role in protecting the zinc coating and surface condition during transportation. At GNEE STEEL, packaging and shipment preparation are treated as an extension of quality control rather than a separate logistics task.
Galvanized steel sheets are vulnerable to moisture, friction, and mechanical impact if not properly protected. Even when the product meets all technical requirements at the factory, inadequate packaging may lead to surface damage during transit.
Before shipment, galvanized steel sheets are inspected and classified according to size and order requirements. Packaging methods are selected based on transportation mode and destination climate.
Common packaging practices include:
Moisture-proof paper wrapping
Steel strapping with corner protection
Wooden pallets or steel skids when required
These measures help reduce the risk of white rust formation and surface scratches.
Below is a typical packaging reference for galvanized steel sheet exports:
| Packaging Item | Description |
|---|---|
| Inner Protection | Anti-moisture paper |
| Outer Protection | Steel sheet or plastic wrap |
| Strapping | Steel bands with edge guards |
| Labeling | Product size, grade, batch number |
| Transport Mode | Container / Break bulk |
Loading is conducted according to pre-planned arrangements to ensure stability inside containers or cargo holds. Coil positioning, weight distribution, and securing methods are checked carefully to avoid movement during transportation.
Final inspection includes verifying packaging integrity, label accuracy, and quantity consistency. Only after confirmation are galvanized steel sheets released for shipment.
Well-managed packaging and loading procedures significantly reduce transportation-related claims. This not only protects the physical condition of galvanized steel sheets but also saves time for customers during unloading and inspection upon arrival.
Reliable packaging contributes to smoother customs clearance and faster warehouse handling, especially for customers managing large volumes of galvanized steel sheet imports.
Since 2008, GNEE STEEL has accumulated extensive experience in exporting steel products to different regions. This experience translates into practical packaging solutions rather than standardized routines.
By ensuring that galvanized steel sheets arrive in good condition, GNEE STEEL supports customers' operational efficiency and reinforces confidence in long-term cooperation. Safe delivery is not an added feature but a fundamental responsibility that GNEE STEEL continues to uphold.
- Available Steel Grade
| Steel grade | Coating | Yield(MPA) | Tensile(MPA) | Elongation(%) |
| DX51D | Z,ZF | -- | 270-500 | 20 |
| DX52D | Z,ZF | 140-300 | 270-420 | 22 |
| DX53D | Z,ZF | 140-260 | 270-380 | 26 |
| DX54D | Z,ZF | 140-220 | 270-350 | 30 |
| S220GD | Z,ZF | 220 | 300 | 18 |
| S250GD | Z,ZF | 250 | 330 | 17 |
| S280GD | Z,ZF | 280 | 360 | 16 |
| S320GD | Z,ZF | 320 | 390 | 15 |
| S350GD | Z,ZF | 350 | 420 | 14 |
| S400GD | Z,ZF | 400 | 470 | -- |
| S450GD | Z,ZF | 450 | 530 | -- |
| S500GD | Z,ZF | 500 | 560 | -- |