Outdoor Oil-immersed Transformer

Apr 07, 2024 Leave a message

The working voltage and current of the transformer shall not exceed 1.1 times the rated voltage and 1.3 times the rated current during use. After the transformer is connected, the grid voltage will rise, especially when the load is light. In this case, some or all of the transformers must be disconnected from the grid. The appearance of transformer bushings and supporting insulators should be clean, without damage, and without traces of discharge. The transformer shell should be clean, not deformed, and free of oil leakage. The transformer and iron frame should not be filled with dust and other dirt. Careful attention must be paid to the reliability of all contact points (power busses, ground wires, circuit breakers, fuses, switches, etc.) on the electrical circuits connected to the transformer bank. Because there is a fault at a contact point on the line, or even the nut is not tightened tightly, it may cause early damage to the transformer and cause an accident to the entire equipment. If the transformer needs to be tested withstand voltage after it has been running for a period of time, the test should be carried out according to the specified value.

1000 kva oil filled transformer
Oil immersed distribution transformer
Oil filled distribution transformers
Oil immersed power transformer
Oil immersed current transformer
Oil immersed self cooled transformer