* Simple maintenance: seldom need any maintenance.
* They are pollution-free
* They are used in the areas of contaminated and damped
* They are easier to Install.
* They have long servie life because of the dielectric heating & low thermal
* Protects the property & people
* For short circuit currents, they have high resistance
* Performance is excellent
*Capacity is high to support overloads
Dry-Type Transformers
The product scope is 50 VA through 10,000 KVA and 120 volts through 25,000 volts. The 600 volt class offering includes industrial control transformers, encapsulated/compound filled general purpose and buck-boost transformers, ventilated designs for general purpose applications, electrostatically shielded transformers and a complete line of motor drive isolation transformers.
The medium and high voltage offering includes core and coil transformers, general purpose designs, pad-mount transformers, unit substation transformers, vacuum pressure impregnated transformers (VPI), and vacuum pressure encapsulated (VPE) transformers. K-Factor rated transformers are offered for the entire product scope.
|
Dry-type transformer type
|
Cast Resin
|
|
Manufacturing Standards
|
IEC, ANSI
|
|
Rated Capacity
|
Up to 25MVA
|
|
Rated Voltage
|
Up to 36KV
|
|
Phases
|
Single or Three phase
|
|
Tapping
|
With tapping links or on-load tap changer
|
|
Frequency
|
50Hz or 60Hz
|
|
Vector groups
|
Dy, Yy, Yd as standard. Other on request
|
|
Class Insulation
|
According to IEC 60085, Class F or Class H
|
|
Type of cooling
|
AN (natural air),AF, AFWF on request
|
|
IP Rate
|
IP00 to IP54
|
|
Environment Class
|
E2
|
|
Climate Class
|
C2
|
|
Fireproof Class
|
F1
|
Technical Specifications:
Dry type cast resin transformers
Rated voltage up to 36 KV
Rated power from 100 KVA up to 4 MVA
Thermal classes F & H
Indoor and outdoor application
Dry type transformer manufacturers
Advantages of cast resin dry-type transformers
Features of Dry Type Distribution Transformer:
1.Safe, fireproof, no pollution, it can be installed directly in the load center.
2.Free maintenance, easy to install, low total operating costs.
3.With good moisture resistance, it can work normally under the 100% humidity. After it stopped operating, the outage without pre-drying can be put into operation again.
4.Low loss, low partial discharge, low noise, good heat dissipation capacity. Under the forced air cooling conditions, it can run at 150% rated load.
5.The equipped perfect humidity protection & control system can provide reliable
our gNEE factory
Packaging&shipping
test creatificate
exhibition photos
customer visit case
gNEE Teams
GNEE factory adopt the most advanced color coating technology and 150+ printed pattern rollers to supply our clients with various custom designs. We can also produce profiled steel sheets of various shapes and lengths as required. Moreover, We offer different surface treatment methods, including passivation, fingerprint resistance, oiling and others. Our steel products are widely used in construction, home appliance, furniture, automobile industry, advertising board, whiteboard, etc.
Hot Tags: dry type transformers, China dry type transformers manufacturers, suppliers, factory, Encapsulated Dry Type Transformer, 750 Kva Dry Type Transformer, Single Phase Dry Type Transformer, Dry Type Transformers, 150kva Dry Type Transformer, Dry Type Distribution Transformers
