Knowledge

‌S350gd ZM275 zinc-aluminum-magnesium coated steel coil‌ is a high-performance steel product with excellent corrosion resistance, high temperature str

SECC electro-galvanized steel sheet is a kind of steel with excellent corrosion resistance, processing performance and mechanical properties, which is

‌Al-Zn alloy coated steel sheet‌ is a steel sheet with a specific coating. Its coating structure is Zn-Al alloy, and the coating composition is 55% Al

DX51D+Z275 refers to ordinary galvanized coil with a zinc coating of 275g.

DX51D has low carbon content, high plasticity and toughness, and is suitable for scenarios that require high plasticity and toughness. DC51D has a sl

DC01 and SPCC are both low-carbon cold-rolled steel grades, but they are specified under different standards: EN 10130 for DC01 and JIS G3141 for SPCC

Dual phase steel is the most widely used advanced high strength automotive sheet, built from a ferrite matrix with dispersed martensite islands. It of

JIS G3141 defines the composition, mechanical properties, tolerances and test methods for cold-reduced carbon steel sheet and strip. This guide compar

High-strength cold rolled steel raises strength above commercial forming grades so thinner sections can carry the same load. Strength is obtained by m

Color coated coil is a product made of hot-dip galvanized sheet, hot-dip aluminum-zinc sheet, electro-galvanized sheet, etc. as the substrate. After s

SGCC is hot-dip galvanized thin steel sheet to JIS G 3302 and SECC is electrolytically zinc-coated sheet to JIS G 3313, both on SPCC substrate. This c

Chrome-free fingerprint-resistant electro-galvanized steel sheet combines electrogalvanizing with chromium-free passivation and a thin organic film. T