Steel plates for enamel include hot-rolled steel plates, hot-rolled pickled steel plates, cold-rolled steel plates, cold-rolled decarburized steel plates, etc. Enamel manufacturers and related practitioners know that the material selection and production process of steel plates are crucial, and steel for enamel is If there are performance requirements, if the performance is not up to standard, it may cause defects in the body or product in the future, which will cause great losses to the quality of the enamel product and the cost of the enamel factory.

The six key performance requirements are briefly described below:
1. Formability
The formability of enamel steel refers to the plastic deformation of enamel steel to achieve the desired shape, size and mechanical properties under the action of external forces. The relevant forming methods of enamel products are mainly stamping, folding, hole expansion, roll bending, etc. Generally speaking, as the carbon content of the steel plate and the content of impurity elements such as sulfur and phosphorus decrease, the formability of the steel will improve, but the scale resistance will decrease. At this time, some alloying elements such as boron and titanium need to be added to the steel. It can not only improve the anti-scaling performance, but also improve the formability.
2. Strength
The strength of the enameled steel plate determines the performance of the final enamel product, such as water heater liner and other pressure-resistant containers. The yield strength of the enameled steel plate will decrease significantly. The less the degree of this decrease, the better. Adding to the steel Alloy elements such as titanium and niobium can improve the strength of the steel plate itself and reduce the strength drop of the steel plate after high-temperature firing.
3. Anti-scaling performance
Generally, the resistance to scale explosion of hot-rolled steel plates is worse than that of cold-rolled plates. When choosing hot-rolled steel plates, you should choose ones with good scale explosion resistance and make auxiliary plans to resist scale explosion, such as sandblasting for pretreatment. , use less pickling, etc.
4. Adhesion performance
Hot-rolled plates must be pickled or shot blasted, so that the surface roughness of the hot-rolled plates after treatment is large and the adhesion performance is good.
5. Resistance to pinhole defects
Decarburized steel: The carbon content is extremely low, so the probability of pinhole defects is very small. It is generally used in one-time enameling processes, such as making enamel household appliance panels, enamel heat exchange components, etc.;
High-strength steel: It has a higher carbon content and a higher probability of pinhole defects, so its composition and microstructure need to be standardized.
6. Welding performance
Compared with ordinary steel plates, the structure of enameled special steel after welding is more uniform and finer, and its performance is better.
The above are the six main properties of steel plates for enamel. In addition, the surface of steel plates for enamel must not have wrinkles, bubbles, scars, delamination, slag inclusions, rust spots, cracks and other defects. If you have any further questions, please feel free to ask!

