Hot-dip Galvanized Alloy Is Not A Panacea

Mar 14, 2024 Leave a message

(1) Alloy selection in hot-dip galvanizing process

The galvanizing process of the hot-dip galvanizing process is an alloy reaction process between zinc and iron, and does not require other elements to participate in the reaction. However, there will be other impurities in the zinc liquid, which will interfere with the alloy reaction between zinc and iron. Therefore, it is necessary to add some alloying elements to reduce the interference of impurities on the ZnFe alloy reaction. For example, alloying elements such as aluminum, copper, etc. in the zinc liquid will make the pure zinc layer thinner. Therefore, the more alloying elements other than zinc, the better, and they cannot be used as "one-size-fits-all". They are only used for adjustment. How to master the application amount requires accumulation of technology and experience.

 

In the hot-dip galvanizing process, how to correctly select alloy categories and specifications depends on the hot-dip galvanizing enterprise's own process conditions, mainstream product categories, quality cost objectives, technical proficiency, etc. to select alloys and apply them correctly. For example, in the company's own mainstream products, the silicon content of the steel matrix component of the workpiece is within the range of the Sandelin effect, and the control requirements for the color difference of the hot-dip galvanizing layer are also particularly strict, then the nickel content in the zinc solution needs to be adjusted to a relatively high level. Higher; if the silicon content in the steel matrix component is not within the range of the Sandlin effect, too high a nickel content will not work.

hot deep galvanized
Hot deep galvanised product
deep galvanized
Hot deep galvanized steel

Skilled employees on the hot-dip galvanizing production line can use binary alloys and adjust the proportions and content levels of different alloy elements according to the fluctuation characteristics of hot-dip galvanizing production conditions; if the hot-dip galvanizing process is relatively stable, it can also be used Multi-component alloys with fixed proportions, or alloys blended according to special requirements.

 

(2) Notes on the application of alloy elements in hanging plating

In the batch hot-dip galvanizing process, when applying multiple alloying elements, it is necessary to consider the positive synergistic effects of the elements and understand the possible negative effects of improper application; that is, not only to pay attention to the reaction between alloying elements to form For high melting point alloy products, it is also necessary to pay attention to whether different alloy elements are compounded and synergistic, and whether they have a negative impact on the appearance of the product and the corrosion resistance and effect of the product.

 

There is still a traditional misunderstanding in the industry that the more alloying elements are added, the better. Blindly adding multiple types of zinc-based alloys ignores the mutual inhibition between different alloying elements, which not only causes a waste of alloys, but also artificially significantly increases production costs.

 

During production, you must pay attention to purchasing zinc-based alloys of qualified quality. Since there are high-melting-point alloy elements in the alloy, during the alloy smelting and processing, the high-melting-point elements cannot be completely melted and will exist in the form of small particles. If the amount of alloying elements added to the alloy is unreasonable and the eutectic points of several alloying elements cannot be found, they cannot be dissolved in zinc and will exist in the form of particles.

To sum up, in the selection and application of alloys, we must choose manufacturers or products with complete testing methods, such as "GNEE STEEL", etc., and choose the type of zinc-based alloys reasonably and correctly, and abandon the idea that alloys are "one-size-fits-all" traditional thinking.

 

(3) Common misunderstandings about alloy application in hot-dip galvanizing process

At present, many employees of hot-dip galvanizing companies still have unclear understanding and application misunderstandings about the application of alloys. Common misunderstandings in alloy application are highlighted in the following aspects.

(1) Expectations for the effects of alloys are too high, and the most typical one is the "one-size-fits-all" mentality.

 

(2) There is insufficient understanding of the impact of alloy elements on the galvanizing process in the hot-dip galvanizing process. It is not realized that the application of alloys is only one link of the hot-dip galvanizing process. The realization of its effect requires the cooperation of other process links, and its relevance is very high. powerful.

 

(3) Many hot-dip galvanizing companies are eager for immediate results in the application of alloys and do not leave sufficient time for the alloy components to transform in the zinc liquid.

 

(4) Many hot-dip galvanizing companies do not refine and evaluate the input and output of alloys. Instead, they simply and straightforwardly require that the alloy application can quickly respond to the characteristics of a certain galvanized layer, and do not start from the Looking for reasons based on the correlation between hot-dip galvanizing process characteristics, we often end up imposing our own misunderstandings arbitrarily on the invalid judgment of alloys, thus making people laugh.

 

(5) Many hot-dip galvanizing companies do not have clear goals in the application of alloys. They often change alloy types and application contents. The more frequent the changes, the less effective they are. This may even lead to confusion in the composition of the zinc solution, increase in production costs, and technical problems. Maturity is unstable, but in such chaos, I am at a loss to make sense.