Advantages And Disadvantages Of Amorphous Alloy Transformer

Feb 27, 2024 Leave a message

In the process of industrialization, the continuous development of the industrial revolution has brought countless conveniences to people's production and life, but it has also brought extreme damage to the natural environment. People have gradually realized the importance of environmental protection and put forward the concept of environmental protection and low-carbon life. The birth of amorphous alloy transformers responded to the mainstream of society. This article mainly introduces the characteristics of amorphous alloy materials and the advantages and disadvantages of amorphous alloy transformer performance.

amorphous alloy transformer

Keywords: Advantages and disadvantages of amorphous alloy transformer

Amorphous alloy transformers are high-tech, environmentally friendly and energy-saving products. Their energy-saving and environmental protection effects have been recognized internationally and are also recognized by domestic power systems and construction departments. At present, the feasibility of product manufacturing and use technology has become increasingly mature, and it has gained a competitive advantage in the market. Its outstanding features of high efficiency, beauty and environmental protection have won unanimous praise and praise from the majority of users, and it is known as "the high-tech green product of the current world electrical trend".

 

The so-called amorphous alloy transformer refers to a transformer made of amorphous alloy into a transformer core and assembled.

Amorphous alloy refers to alloy materials that use ultra-rapid solidification technology during the manufacturing process, so that in the microstructure of the material, during the process of solidifying the metal atoms from liquid (molten steel) to solid, the atoms have no time to arrange into conventional crystals. The structure is solidified, and the resulting alloy material with a disordered atomic structure is called an amorphous alloy. Amorphous alloy materials have been found to have very excellent magnetic permeability, and their demagnetization and magnetization processes are extremely easy to complete. Compared with crystalline alloys, amorphous alloys have undergone significant changes in physical, chemical and mechanical properties. In addition, amorphous alloy materials are also widely used in many fields such as electronics, aviation, aerospace, machinery, microelectronics, etc. For example, in the aerospace field, they can reduce the weight of power supplies and equipment and increase the payload. Used in civil power and electronic equipment, it can greatly reduce the size of power supply, improve efficiency and enhance anti-interference ability. Micro cores can be widely used in transformers in integrated services digital networks (ISDN). Amorphous strips are used to make sensor tags for anti-theft systems in supermarkets and libraries. Amorphous alloys have miraculous effects and have broad market prospects. During the Tenth Five-Year Plan: Our country's scientific and technological workers will surely make more contributions that attract the world's attention in the field of amorphous alloy technology.

Taking amorphous alloys dominated by iron as an example, it has the characteristics of high saturation magnetic induction intensity and low loss. Iron-based amorphous alloys greatly reduce core loss compared to silicon steel materials, achieving high efficiency and energy saving effects. Therefore, as an extremely excellent magnetic conductive material, it is introduced into products that require magnetic circuits such as transformers.

 

Iron-based amorphous alloys are competing with silicon steel in the power frequency and medium frequency fields. Compared with silicon steel, iron-based amorphous alloys have the following advantages and disadvantages.

Amorphous alloy materials

1) The saturation magnetic flux density Bs of iron-based amorphous alloy is lower than that of silicon steel. However, under the same magnetic flux Bm, the amount of magnetic flux loss of iron-based amorphous alloy is 3% smaller than that of 0.23mm thick silicon steel. Most people think that the reason for the small loss is the thin thickness and high resistivity of the iron-based amorphous alloy strip. This is just one aspect. The more important reason is that the iron-based amorphous alloy is amorphous, and the atomic arrangement is random. There is no magnetocrystalline anisotropy caused by the atomic directional arrangement, and there is no crystallinity that produces local deformation and composition deviation. grain boundary. Therefore, the energy barrier that hinders domain wall motion and magnetic moment rotation is very small, and it has unprecedented soft magnetism, so the magnetic permeability is high, the coercive force is small, and the loss is low.

 

2) The operating magnetic flux density of iron-based amorphous alloy core is 1.35T~1.40T, and that of silicon steel is 1.6T~1.7T. The weight of the iron-based amorphous alloy power frequency transformer is about 130% of the weight of the silicon steel power frequency transformer. However, even if the weight is heavy, for a power frequency transformer with the same capacity, the loss of a magnetic core made of iron-based amorphous alloy is 70% to 80% lower than that of silicon steel.

 

3) Taking into account losses, the total estimated price is 89%. It is about 80% lower than the no-load loss of a silicon steel core transformer (referring to the power loss measured on the primary when the secondary of the transformer is open), and the no-load current (when the secondary of the transformer is open, there is still a certain current in the primary, This part of the current (called no-load current) drops by about 85%. It is a distribution transformer with ideal energy-saving effect at present. It is especially suitable for places with low load rates such as rural power grids and developing areas. Using amorphous alloys with outstanding magnetic permeability as core materials for manufacturing transformers can ultimately achieve very low loss values.

 

4) The hardness of the amorphous alloy sheet material is very high and it is difficult to cut with conventional tools; the thickness of the single sheet is extremely thin and the surface of the material is not very flat, so the filling coefficient of the core is low; it is very sensitive to mechanical stress, and the tension and gravity Bending stress will affect the magnetic properties, and the structure must be specially designed.

 

5) The amorphous alloy transformer adopts a fully sealed structure, which can delay the aging of transformer oil and insulating paper. It is not only compact in structure, but also has the advantages of high operating efficiency and maintenance-free. Amorphous alloy transformers have very stable operating performance due to low losses, low heat generation and low temperature rise. The low-voltage winding of amorphous alloy transformer is foil-wound, with low loss, strong short-circuit resistance and advanced structure.

 

6) Iron-based amorphous alloy has stronger resistance to power waveform distortion than silicon steel

Currently, the core material loss of power frequency power transformer is tested under a sine wave voltage with a distortion of less than 2%. The actual power frequency power grid distortion is 5%. In this case, the loss of iron-based amorphous alloy increases to 106% and the loss of silicon steel increases to 123%. If the higher harmonics are large and the distortion is 75% (such as a power frequency rectifier transformer), the loss of iron-based amorphous alloy increases to 160%, and the loss of silicon steel increases to more than 300%. It shows that the iron-based amorphous alloy has stronger resistance to power waveform distortion than silicon steel.

 

7) The cost of amorphous alloy transformers is higher than that of silicon steel core transformers, and the processing and manufacturing costs of amorphous alloy cores are more expensive than silicon steel sheets. Since silicon steel sheet is a commonly used magnetic material, its production and use have a long history, and a relatively complete industrial chain and market has been formed in society. However, amorphous alloy is an emerging material, and its use has not been popularized and has not been formed in the market. A series of complete industrial chains from production, production, processing to use. From an economic point of view, amorphous alloy is a new product that has not been washed out by market competition. Its production and production have great limitations, and its marketability is not strong yet, so the price is relatively expensive. Generally, the cost of amorphous alloy transformers is about 30% higher than that of silicon steel core transformers of the same model. In addition, the silicon steel material production process is mature and the structure is stable.

 

However, the overall cost of use is lower than that of traditional transformers due to its significant energy-saving effect and lower operating costs. At the same time, it plays a huge role in reducing load, pressure and burden on the power grid.

 

Assume that the load loss (copper loss) of the power frequency transformer is the same, and the load factor is also 50%. Then, to make the iron loss of the silicon steel power frequency transformer the same as that of the iron-based amorphous alloy power frequency transformer, the weight of the silicon steel transformer is 1.8 times that of the iron-based amorphous alloy transformer. Therefore, most people in China generally agree that the weight, cost and price of iron-based amorphous alloy power frequency transformers, aside from the loss level of the transformer, are 130% to 150% of those of silicon steel power frequency transformers, which does not meet market requirements.

 

Performance-price ratio principle. In terms of reducing the load pressure on the power grid, comparing the contributions of the two power frequency transformers, it can be clearly seen that the role of the iron-based amorphous alloy power frequency transformer is very obvious. Take a 50Hz, 315kVA three-phase transformer as an example: when using a silicon steel core, the no-load loss is 0.48KW, and when the load factor is 80%, the loss is 3.65KW; when using an iron-based amorphous alloy core, the no-load loss is 0.28KW. When the load rate is 80%, the loss is 1.35KW. It can be seen from the above data that a 315KVA transformer with an amorphous alloy core can have 40% to 60% less loss than a silicon steel core when no load or load. In one year, it can save about 10,000 kilowatt-hours of electricity for the power grid, while reducing the load factor of the power grid and reducing the operating costs of the lines.

 

8) The remarkable features of transformers with amorphous alloy cores are energy saving and environmental protection. First of all, in terms of environmental protection, technical testing has shown that when amorphous alloy iron cores are used in oil-immersed transformers, they can effectively reduce the emission of harmful gases such as CO, SO, NO, etc., and reduce the degree of air pollution, so it can be called one of the most important power products in the 21st century. of "green products". Secondly, the most significant feature of amorphous alloy transformers is that the no-load loss is very low and the energy saving effect is obvious. Because amorphous alloy materials have superior magnetic permeability, they are easier to magnetize or demagnetize with very little energy consumption. Therefore, the no-load loss of amorphous alloy transformers is much lower than that of traditional transformers. Taking the 500kVA amorphous alloy transformer produced by SEC (American Superconducting Energy Company) as an example, the no-load losses of the amorphous alloy transformer and S9 transformer are 190W and 900W respectively. The no-load loss of the amorphous alloy transformer is only about 20% of that of the S9 transformer, and the energy saving effect is very significant. For areas with large power load fluctuations such as highways, urban infrastructure, and residential areas, the energy-saving benefits of amorphous alloy transformers are more obvious. Due to the significant energy-saving effect, a large amount of power plant investment can be saved, the consumption of fuel for power generation can be reduced, thereby reducing pollution to the atmospheric environment. The magnetostriction coefficient of iron-based amorphous alloy is large, 3 to 5 times that of silicon steel. Therefore, the noise of the iron-based amorphous alloy power frequency transformer is 120% of the noise of the silicon steel power frequency transformer, which is 3~5dB larger.

 

Conclusion: From the above analysis, it can be seen that amorphous alloy has many advantages. As a new type of magnetic permeability material, it has advantages that traditional silicon steel materials cannot match and has broad market prospects. Amid the calls for environmental protection and energy conservation, amorphous alloy transformers will surely become the mainstream of new transformers.